Seat: Fabricated of 2 1/2" thick, naugahyde cushion (white) seamless design with all leading edges having a radius. Seat is secured to a 1/2" thick marine plywood.
Tubing: Fabricated of type 304 #18 ga stainless steel with #4 satin finish.
Main Frame: Type 304 #18 ga 1 1/4" with satin finish tubing. Underside has no exposed fasteners.
Flanges: Type 304 #18 gauge stainless steel with three (3) countersunk exposed mounting points. Under slung supports have a 1 1/4" OD. (Satin finish)
Mounting Bracket: Type 304 #14 ga stainless steel "hat" style bracket with 4 mounting support points. Bracket acts as a guide to raise and lower seat platform and is equipped with four (4) points to secure to wall surface. For maximum support, bracket is mounted so the bottom is set on the finished floor surface.
Adjustable Mounting Height: Per ADA code, seating area of shower seats must be mounted at a height between 17"-19" above the finished floor. The vertical support legs allow the flexibility to mount the seat at the height per ADA/ state or local guidelines.
U933L: Surface Mounted Retractable Shower Seat. Seat frame and supports are fabricated of 1 1/4" O.D. #18 gauge stainless steel tubing with a #4 satin finish. Seat cushion is constructed of 2 "" thick foam rubber and covered in white naugahyde
Overall Size: 32"W x 22"D (seating area)
813mm x 559mm
Features
Seat Bottom Is Fabricated of 1/2" Marine Grade Plywood For Support
Cushion is 2 1/2" Thick and Wrapped In Seamless White Naugahyde
Capable of Supporting Up To 250 lbs When Properly Mounted
