U933 Series
Product Features
Seat bottom is fabricated of 1/2" marine grade plywood for support
Cushion is 2 1/2" thick and wrapped in seamless white naugahyde
Capable of supporting up to 250 lbs when properly mounted
Product Specs
Seat: Fabricated of 2 1/2" thick, water-resistant reinforced vinyl fabric cushion (white) seamless design with all leading edges having a radius. Seat is secured to a 1/2" thick marine plywood.
Tubing: Fabricated of #11 ga stainless steel with #4 satin finish.
Main Frame: #18 ga 1 1/4" with satin finish tubing. Underside has no exposed fasteners.
Flanges: #11 gauge stainless steel with four (4) exposed mounting points. Under slung supports have a 1 1/4" OD. (Satin finish)
Mounting Bracket: #16 ga stainless steel "hat" style bracket with 4 mounting support points. Bracket acts as a guide to raise and lower seat platform and is equipped with four (4) points to secure to wall surface. For maximum support, bracket is mounted so the bottom is set on the finished floor surface. Seat will remain in an upright position when not in use by means of a spring clip.
Overall Size: 32"W x 22"D (seating area)
813mm x 559mm
U933L: Left Handed
U933R: Right Handed
Installation Instruction
To comply with ADA Code, seat should be mounted at a height 17" - 19" above finished floor. Check all state and local codes for proper mounting requirements. Recommend in wall mounting on all shower seats. (BP10) Place seat up against wall making sure the